Mackie Digital 8 Bus Owner's Manual page 26

ENTER button
This button initiates numeric changes that
have been typed into the POSITION or RANGE
display with the console number buttons or
with a standard IBM-style keyboard connected
to the console.
LOOP button
This button is used to set the ending locate
point in a loop. First enter the starting locate
point using the number buttons, then press EN-
TER (you must be in Locator mode). Next, press
LOOP, enter the ending locate point number us-
ing the numeric buttons, then press ENTER.
STORE button
This momentary button is used to save lo-
cate points and console automation snapshots.
LOCATOR button
This button allows the number buttons to be
used for entering specific location numbers.
When in this mode, the left two digits in the
RANGE display indicate the locate point number.
SNAPSHOT button
This button allows the number buttons to be
used for entering snapshot numbers. When in
this mode, the left two digits in the RANGE
display indicate snapshot numbers.
Transport Controls
These buttons control external devices that
respond to MIDI Machine Control (MMC) and
ESAM II (with optional Video Sync I/O card).
MMC is transmitted at the MIDI output port on
the rear panel of the Remote CPU, which can
be connected to MMC-compatible devices.
If you are using the optional Video Sync I/O
card, ESAM II machine control is transmitted at
the RS232/422 9-Pin D-Sub connector on the
card (see Appendix C for an explanation of Video
Sync I/O card installation and connections).
REWIND button
Engages external machines to fast-rewind
with no given locate point.
FAST FWD button
Engages external machines to fast-forward
with no given locate point.
STOP button
Stops external machines at the current
position.
Note: The STOP button lights when time code
is no longer received.
PLAY button
Engages external machines to play at nor-
mal speed from the current position. It lights
when time code is being received.
RECORD button
Engages the Master Record function on ex-
ternal machines, regardless of transport activity.
JOG & SHUTTLE button
Engages the rotary dial to advance external
machines forward or backward with single-
frame accuracy.
Rotary Dial Encoder
This multifunction dial enables the scrub
function with external machines and allows for
data input and screen paging.
Digital 8•Bus Description
2-11