Recalling Snapshots - Mackie Digital 8 Bus Owner's Manual

SET TIME
SMPTE VIEW
5-12
Preparing for a Session
POSITION
HOURS MINUTES SECONDS FRAMES
BARS BEATS TICKS
1 2 3
6 7 8
ENTER LOOP STORE
REWIND FAST FWD STOP
SHUTTLE
2. Begin setting rough mixes. These may
3. Once the desired settings have been
4. There are a number of other options
5. Click on the Close button in the upper
TO RECALL SNAPSHOTS
RANGE
FROM TO
From the console:
1. Press the SNAPSHOT button in the
LOOP
4 5
2. Type in the two-digit snapshot number
0
9
LOCATOR SNAPSHOT
MODE
PLAY RECORD
3. Press the ENTER button. The console
JOG & SHUTTLE
include send levels to tape, monitoring
levels from tape, aux send levels, and
EQ and effects settings.
made, click on Edit in the upper-left
side of the box and select "New
Snapshot" in the drop-down menu. A
new snapshot is created using the first
unused number. You can give the
snapshot a new name by double-
clicking on the name and typing in the
characters.
available in the Edit menu for deleting
snapshots, renumbering (in sequential
numerical order, beginning with 1),
changing and storing a snapshot, and
locking and unlocking a snapshot.
right corner of the dialog box to
remove the Snapshots dialog box from
the screen (or click on the Snapshot
button in the menu bar, or press Ctrl-3
on the keyboard).

Recalling Snapshots

Transport Section, if it's not already
selected.
you want to recall using the number
buttons. The number appears in the
RANGE display.
updates to indicate the selected
snapshot. If you're recording an
automation pass, the snapshot data
will be written to the current session.