Page 2
Call Mackie Tech Support toll-free (in the U.S.) at 800-258-6883 (Monday through Friday, 7 AM to 5 PM Pacifi c Time) with any Mackie product- question you can conjure. Put them through the wringer! We encourage it.
Page 3
The “Y” Cable is used for connecting serial effects devices, such as graphic equalizers or compressors, to a Mackie mixer’s Channel or Bus insert jacks. On one end is a standard Tip-Ring-Sleeve “stereo” plug. Its tip and ring are wired to separate mono Tip-Sleeve plugs. Note that the RING of the TRS plug (A) is actually wired to the TIP of one of the mono TS plugs (B).
Page 4
VLZ PRO 8•BUS TRACKING Delay2 Reverb2 Delay1 Reverb1 Keyboard Drum Machine Mono FX Guitar Mic 1-2 Stereo Compressor OPTIONAL: You can use 24 Direct Outs as the signal source for your HDR24/96 hard disk recorder or three 8-track Digital recorders. Then, route the signals from the recorder(s) back to the Tape Returns for mixdown.
Page 5
For the simplest recording solution, plug 24 Submaster/Tape Outputs into one HDR24/96 hard disk recorder or three 8-track Digital recorders. Then, route the signals back to the Tape Returns for mixdown. HR824s or other powered monitors Contuinued from previous page 8•BUS TRACKING PART 2 What does Mix-B do? Mix-B is where your tape returns show up during...