Recalling Console Snapshots During A Performance - Mackie Digital 8 Bus Owner's Manual

SET TIME
SMPTE VIEW
6-74
Starting a New Session
POSITION
HOURS MINUTES SECONDS FRAMES
BARS BEATS TICKS
1 2 3
6 7 8
ENTER LOOP STORE LOCATOR
REWIND FAST FWD STOP PLAY
SHUTTLE
3. Click and drag on the V-Pot for all the
4. Click on the CUE 1 (or CUE 2) PAN
5. Click and drag on the V-Pot for all the
Recalling Console Snapshots
During a Performance
The power of automation can make
your life a whole lot easier. If you've saved
some snapshots of the console's audio path
settings, you can instantly recall them at
any time during a show (see Chapter 7,
"Automation"). You might have set up dif-
ferent mixes in advance for each individual
song, which you can recall in succession
during the show. During a live theater per-
formance, this can be invaluable to make
quick changes from scene to scene.
TO RECALL A SNAPSHOT
RANGE
FROM TO
From the console:
LOOP
1. Press the SNAPSHOT button in the
4 5
2. Enter the two-digit snapshot number
9 0
SNAPSHOT
MODE
RECORD
3. Press the ENTER button to recall the
JOG & SHUTTLE
TO RECALL A SNAPSHOT
From the screen:
1. Click on the SNAPSHOT button in the
2. The Snapshot window opens, contain-
3. Double-click on the snapshot title (in
channels you want to send to the aux-
iliary mix.
button in the V-Pot Select Section.
channels you are sending to the auxil-
iary mix to control the amount of left
or right panning for each channel.
Transport Section.
you want to recall using the number
buttons. The number appears in the
RANGE display.
snapshot.
lower menu bar.
ing a list of snapshots currently stored
with the session.
the gray area) you want to recall from
the list.