Saving A Session - Mackie Digital 8 Bus Owner's Manual

m i x # 1
GROUP
S a v e
5-6
Preparing for a Session
D8B
56 INPUT / 72 CHANNEL DIGITAL MIXER
( N E W
< < > > C a n c e l
SETUP
SAVE SAVE AS...
GENERAL PLUG INS
D8B
56 INPUT / 72 CHANNEL DIGITAL MIXER
S e s s i o n " S t a r t u p " ?
C a n c e l
S E S S I O N ) - >
N e w
NEW LOAD
DIGITAL I/O
- >
Y e s
3. When the name appears as you want
it, press the SELECT button below
NEW to complete the operation. The
console reverts to its default nominal
settings to start a new session.
TO CREATE A SESSION
From the screen:
1. Using the mouse, choose "New
Session" from the File menu in the
upper menu bar (or press CTRL-N on
the keyboard). A dialog box appears
asking if you want to save any
changes to the current session. Make
your selection to continue.
2. The "Save File As..." dialog box
appears with the name "mix#1." If you
want to rename the session, you can
type the new name in now.
3. When you're satisfied with the name
of the new session, click on the "Save"
button to complete the operation. The
console reverts to its default nominal
settings to start a new session.

Saving a Session

TO SAVE A SESSION
From the console:
1. Press the SAVE button in the Setup
Section. The Fat Channel Display now
shows the Save Session menu, which
asks if you want to save the session.
2. Press the SELECT button below "Yes."
Tip: A faster way to save a session is to
press the SAVE button twice.
TO SAVE A SESSION
From the screen:
1. Using the mouse, choose Save Session
from the File menu in the upper menu
bar (or press CTRL-S on the keyboard).
2. The session has now been saved.