Lantronix Console Server 3200 User Manual page 24

1 will refer to the netterm subsystem and
2 will refer to the network subsystem on the card
F1 - G1 switch cards (do not require updating)
H1 - O1 device cards
P1 - control card
LINESPERPAGE [n]
LISTCARDS
LISTDEVICES
LISTUSERS [user id|/ALL]
LOG [/ENABLE|DISABLE]
LOGOUT,LOGOFF
MODEM [/DEFAULT]
MODEMTIMEOUT [t]
NETWORK [/ALL|slot letter]
POWERSTATUS
PROMPT [/CLEAR|/DEFAULT]
MODEM [/DEFAULT]
MODEMTIMEOUT [t]
NETWORK [/ALL|slot letter]
POWERSTATUS
PROMPT [/CLEAR|/DEFAULT]
More
RESTORE
TELNETTIMEOUT [t]
TERMINALS
TERMINALS [/ALL|n] (n can be 1 to 17) - change settings
tftp [/B|/C|/D|/E] [get] host:file - Modified tftp command, used to
tftpkill
TIMEOUT [t]
VERSION [/ALL|slot letter]
sys admin>>
A listing of abbreviations for the administrator commands is also available when
connected to the administrator port. The ABBREVIATIONS command is only available
when logged in.
sys admin>ABBREVIATIONS
ConsoleServer3200 Sys Admin Command Abreviations List
ABBREVIATIONS
ADDUSER
BACKUP
BREAK
CHANGEPSWD
CONNECTIONS
DELETEUSER
DEVICES
EDITUSER
FORCELOGOUT
HELP
- Display/set number of lines before pause
(n can be 0 to 99, 0 disables)
- Show list of installed cards
- Show list of device names
- Display list of users
- Enable/disable system events
and set destination of event info
- Logout
- Display/set modem init string
/DEFAULT - set init string to default
- Display/set timeout for modem calls
(t can be 0 to 30 minutes, 0 disables)
- Set network parameters ('B' - 'E')
- Show status of power supplies
- Set/clear system prompt for logged-out state.
or set prompt to factory default.
- Display/set modem init string
/DEFAULT - set init string to default
- Display/set timeout for modem calls
(t can be 0 to 30 minutes, 0 disables)
- Set network parameters ('B' - 'E')
- Show status of power supplies
- Set/clear system prompt for logged-out state.
or set prompt to factory default.
- Restore internal database
(upload ASCII file)
- Display/set timeout for telnet sessions
(t can be 0 to 30 minutes, 0 disables)
- Display terminal settings
transfer new updates to this box
(/B use network card B, /C use card C, etc.)
- kill active tftp session.
- Display/set timeout on sys admin login
(t can be 0 to 9 minutes, 0 disables)
- Report software version information
(/ALL - return version for all cards)
- A
- ADDU
AU
- (no abbreviation)
- (no abbreviation)
- PASSWD
PSWD
- C
- DELETEU
- DEV
- EDITU
EU
- (no abbreviation)
- H, ?
20