Lantronix Console Server 3200 User Manual page 23

LOGGED OUT HELP SCREEN
LCI3200>>help
ConsoleServer 3200 Sys Admin Command List
[] - optional <> - parameter must be specified
| - OR
F1 - Display Help Screen (VT100 mode)
ABBREVIATIONS
CONNECTIONS [/MONITOR]
INFO <slot letter>
LISTCARDS
LISTDEVICES
POWERSTATUS
VERSION [/ALL|slot letter]
LCI3200>>
LOGGED IN HELP SCREEN
sys admin>>help
ConsoleServer 3200 Sys Admin Command List
[] - optional <> - parameter must be specified
| - OR
F1 - Display Help Screen (VT100 mode)
ABBREVIATIONS
ADDUSER [new user id]
BACKUP
BREAK <terminal channel>
CHANGEPSWD
CONNECTIONS [/MONITOR]
DELETEUSER [existing user id|/XX] - Delete a user by user id or number
(use LISTUSERS to get the number in the first column which
corresponds to the user you wish to delete)
DEVICES
DEVICES [/ALL|n|device name] (n can be 1 to 32) - change settings
EDITUSER [existing user id]
FORCELOGOUT <terminal channel>- Force a user off the system
FORCELOGOUT sysadmin <network slot letter> - Force logout a sys admin
session on a network card.
<network slot letter> - card slots B through E only.
INFO <slot letter>
LCIUPDATE [/tftp][<subsystem>]- Start system update process
/tftp - used only at console port, when system updates are
transfered using the network.
[<subsystem>]- destination of image sent over network
while facing the back of the 3200
(where cards can be inserted or removed), the letters A-P are used
to refer to the slots in the box.
Starting from the left to right, A,B,C,D,,,,P
A number after the letter tells which subsystem on the card to
program.
Currently the only card which has two subsystems is the network card.
Otherwise all other cards have only one subsystem.
see the following examples:
example: A1 for modem card
B1 for a terminal card
B1 and B2 for network card (netterminal and network files)
Card type ranges:
A1 - modem card
B1 - E1 can hold either terminal cards or network cards
if a network card is in one of the slots,
- Show list of command abbreviations
- Show list of current connections
(/monitor will auto-refresh)
- Report miscellaneous information
- Show list of installed cards
- Show list of device names
- Show status of power supplies
- Report software version information
(/ALL - return version for all cards)
- Show list of command abbreviations
- Add a new user
- Backup internal database
(db will be output using ASCII)
- Break connection
- Change the sys admin password
- Show list of current connections
(/monitor will auto-refresh)
- Display device settings
- Edit a user's settings
- Report miscellaneous information
(requires update file(s))
19