View The Insert Effect Assignments For The Demo Song - Korg D1600 Manuald Tour

Digital recording studio

Hide thumbs Also See for D1600:

Table of Contents

3. Press the "HiEq" knob for track 4 - the display will indicate "HiEq4".

4. Rotate the DIAL to apply new High EQ settings to the bass track.

5. Press to highlight the "MidEq4" knob icon, and use the DIAL to apply Mid EQ settings.

6. Press the "MidFc4" knob, and use the DIAL to set a new Mid frequency for the bass track, and then work with the "LoEQ4"

values to finish working with the track.

Note:

The upper-left of the display indicates the EQ parameter and track you're currently working on.

View the Insert effect Assignments for the demo song:

1. Press the STOP key, and then press the IN/LOC1 key to reset the song to the beginning.

2. Press the INSERT EFFECT key. The diagram below indicates the settings for this song:

3. With playback stopped, press the "InsAss" (Insert Assign) tab in the display.

4. Press the ">" popup button to the right of "Assign:" in the upper-left of the display.

5. Make sure that the "PlayTrack" radio button is selected (you'll be applying an insert effect to a playback track). Press "OK" to

return to the previous page.

6. In the display, note the Insert effect track locations for playback: Track 1>Insert effect [1], Track 2> Insert effect [2], Track 7>

Insert effect [3], Track 8> Insert effect [4]. The effect configuration is set to use four insert effects on playback.

Overview of D1600 Insert effect Configurations:

There are four configurations available in the Select Effect Type menu:

1in2outx2:

Primarily Guitar and Bass Chains of 3-5 effects each, Use for recording / on input only. This configuration is good for mono-in,

stereo-out sources.

2in2outx2:

Great selection of effects for keyboards and stereo output instruments.

1in1outx4:

The default setting for new songs. Good to use for fixed panning sources like rhythm guitar - selecting this configuration lets you

select from four mono Insert effects to be used in the song.

1in1outx8:

The largest configuration of multiple effect choices - use this one when you need up to eight mono effects in a song. Ideal for fixed

pan sources that need effect isolation, like drums.

Note:

For more information on setting assignments, configurations and locations of insert effects, see the D1600 Owner's

Manual, pages 43 and 105.

KORG D1600 Guided Tour

Table of Contents