Playing Back The Demo Project; Playing Back; Pausing; Stopping Playback - Korg mr-1 Owner's Manual

1-bit mobile recorder

Hide thumbs Also See for mr-1:

Table of Contents

4. Playing back the demo project

The MR-1 contains a high-quality demo project that was recorded in DFF(DSDIFF) format.

Here's how to play back this project.

What is a project?

When you record on the MR-1, two files are created; an audio file and a project file (contain-

ing protection data and markers, etc.). These two files are collectively called a "project," and

can be operated on the MR-1 as if they were a single audio file. (→p.44 "Hard disk structure

and files")

When you've turned on the power, make sure that the demo project name is shown in the

upper part of the level meter screen, and press the play/pause button.

The demo project recorded on the MR-1 will play back.

If something other than the demo project is shown, select the demo project as described in "Select-

ing and playing back a project/file" (p.18).

During playback, press the play/pause button to pause at that location. When you press the

play/pause button once again, playback will resume from that location.

During playback, press the stop button.

If you then press the play/pause button, playback will start from the beginning of the cur-

rently selected project/file.

During playback, you can hold down the rewind button to rewind while listening to the sound.

You can hold down the fast-forward button to fast-forward while listening to the sound.

If you assign marks to a project, you'll be able to move quickly to a desired point (→p.21).

Project Name

Table of Contents