Additional Tips When Working With Scenes - Korg D1600 Manuald Tour

KORG D1600 Guided Tour
Tip: You can view Scene fader and pan settings from scene to scene, by disabling "SceneRead:On", and selecting the
"MixView" tab. Then highlight the "Scene number" and use the DIAL to move from scene to scene, and the MixView
display will indicate the changes.
Tip: Scene changes (up to 100 per song) can be transmitted and received via MIDI program change messages. For more
information on Scene mode operations, see the D1600 Owner's Manual, pg. 41.
Tip: In any song where Scene Memory is enabled (SCENE key lit when song is selected), the settings originally stored as
scenes will be recalled each time you restart the song. Disable Scene Memory if you want to edit, create or overwrite new
scenes in a song.

Additional tips when working with Scenes:

Creating multiple Scenes in a song:
You can create a number of scenes in a song, including fader, pan, EQ, effect settings and send levels, and AUX send levels. Try
working with the copied song "SISTER DANCE", and add multiple scenes to your new mix. For example, there may be places in the
demo song where you'd like to pull out the horn or keyboard audio. Just move to these locations, set the appropriate faders to "oo",
and then store a new scene. Bring the faders back up at the point in time where you want the instruments back in the mix, and store
another scene for the new fader settings. Your scenes will playback seamlessly, when you playback the song with ("Scene Read:
On").
To Copy Scenes to new time locations:
1. Press the SCENE key, and in the display, press the "ReadDel" tab.
2. Press to turn "SceneRead Off" (if it is On).
3. Select a Scene that you want to copy. (This can be done either in ReadDel page or MixView page).
4. Press the SONG key, then use the "Counter" and DIAL to select a location where you want to store the Scene you've just
selected. (This can also be done by playing and then stopping the song, or by pressing the REW or FF key.)
5. Press the SCENE key, then press the STORE key, followed by pressing the SCENE key again, to copy the scene to the new
location.
6. Select the "ReadDel" tab, and press to turn "SceneRead On".
24