Set View More; Figure 11: Home Screen Outside Room Temperature; Figure 12: Home Screen Room, Room Setpoint Temperature; Figure 13: Set View More First Screen - Honeywell CUL6438SR-CV1 Configuration Manual

STRYKER CVAHU ZIO CONFIGURATION GUIDE
Figure 11: Home screen Outside Room
Temperature
Home screen: OUTSIDE ROOMTEMPERATURE
Description: Displays outside air temperature and
room temperature (setpoint is not adjusted from this
home screen)
Figure 12: Home screen Room, Room Setpoint
Temperature
Home Screen: ROOM, ROOM SETPOINT
TEMPERATURE
Description: Displays room temperature and room
setpoint temperature (setpoint is adjusted from this
home screen)

Set View More

SET VIEW MORE allows the contractor to provide
parameter access (view only or adjustable) to the
tenant's VIEW MORE soft key.
Click SET VIEW MORE soft key to display the first
configured parameter as shown in

Figure 13: Set View More First screen

The soft keys changes to DONE, CANCEL, and
NEXT as per configuration requirement.

The Up and Down arrow keys switch the
parameter between YES and NO (view or no
view in tenant mode).
o
YES means that the tenant has access to
the parameter on the VIEW MORE screen.
o
NO means that the tenant does not have
access to the parameter.
o
If NO is selected for all parameters, then the
VIEW MORE soft key does not display in
tenant mode.

Click NEXT soft key to cycle through the
configured VIEW MORE screen's next parameter
or category

Click DONE soft key to save configuration
changes.

Click CANCEL soft key to exit VIEW MORE
without saving any changes.
Note:
Click NEXT, DONE, and CANCEL to do
YES or NO configuration for below
mentioned parameters.
18
Figure 13.