Parameters; Figure 14: Parameter Group Sensors; Figure 15: Parameters Sensors Zio Temp - Honeywell CUL6438SR-CV1 Configuration Manual

STRYKER CVAHU ZIO CONFIGURATION GUIDE

Parameters

PARAMETERS allow the contractor to monitor and/or
adjust parameters in the programmable controller.
Click PARAMETERS soft key on contractor mode
default home screen to display the first configured
category as shown in Figure

Figure 14: Parameter group Sensors


The soft keys changes to DONE, EDIT, and
NEXT as per configuration requirement.

Click the EDIT soft key to display the parameter
list for the selected category. It displays the first
parameter in that category (For example ZIO
TEMP parameter in the SENSORS category as
shown in Figure 15.

Figure 15: Parameters Sensors Zio Temp


If the parameter is configured as adjustable by
the tenant, the up and down arrow keys adjust
the value of the parameter.

Click NEXT soft key to display the next
parameter or category.

Click DONE soft key to save configuration
changes.

Click CANCEL soft key to the exit PARAMETER
group or PARAMETER without saving any
changes.
14.
Click NEXT on SENSORS parameter group screen.
Other parameter group screens are displayed in
following order.
1. Status
2. Temp SP
3. Override
4. Alarms
5. Snsr Cal
6. Wm Confg
7. Confg Ctl
8. Confg Ui
9. Confg Di
10. Confg In
11. AO1
12. AO2
13. AO3
14. Cnfg Out
15. Time
16. Set Time
17. Set Date
18. Schedule
20