Using Alternative Telephone Network Service Providers (Dial Prefix); Using Alternative Telephone Network Service Providers (Dial Prefix) - Oce sx1481 User Manual

Using alternative telephone network service providers (dial prefix)

When you make a call, you may want to use alternative telephone network service pro-
vider to take advantage of low rates.
The following information describes how to program the access number.
1
Press <Menu>, <2>, <2>, <1>, <6>, then <Enter>.
Dial Prefix No
_
2
Enter the telephone network access number using the numeric keys.
Access numbers may contain up to 40 digits.
If you must wait for another dial tone at the dialing, enter a pause at the end of
the access number by pressing the <Pause /Dial Options> soft key. If <Pause/Dial
Options> are not assigned to any soft key, press <Advanced Functions> repeatedly
until "Pause /Dial Opt." appears and then press <Enter> (refer to "Special dialing
characters," page 3-3).
3
Press <Enter> to save it.
4
Press <Reset> to exit and return to the standby mode.
NOTE: "Pause /Dial Opt." has been assigned to a soft key as default.
Sending faxes with the Dial prefix feature
To dial using the numeric keys
1
Place the document on the ADF.
2
Press <Advanced Functions> repeatedly until "Dial Prefix(/N)" appears then press
<Enter> to enter an "/N".
– or –
If you assigned "Dial Prefix" to a soft key (page 8-2), simply press that key.
This symbol indicates access to the alternative telephone network.
Press Start
/N_
3
Enter the fax number using the numeric keys.
4
Press <Start>.
NOTE: • You must enter the full National Code telephone number when dialing telephone
numbers via any network.
• You can assign the "Dial prefix" to a soft key (page 8-2) to enter an "/N", but it can-
not be combined with any one-touch key or speed-dial number for dialing. In order
to send faxes using the one-touch key or speed-dial number, you must instruct
your machine to access the alternative telephone network when you store the fax
number into your autodialer.
• To enter an access number into your autodialer:
Before entering a fax number, press <Advanced Functions> repeatedly until "Dial
Prefix(/N)" appears then press <Enter> to enter an "/N". And then, enter the fax
number.
4-20 s
endInG faxes