Sending A Document Using A Sub-Address And Password - Oce sx1481 User Manual

Sending a document using a sub-address and password

1
Switch to the fax mode by pressing <
2
Place the document on the ADF.
Adjust the document mode and contrast if necessary.
3
Press <Advanced Functions> until "F-Code Tx" appears on the LCD then press
<Enter>.
F-Code Tx
– or –
If you assinged "F-Code Tx" to a soft key (page 8-2), simply press that key.
Enter Sub-Address
_
4
Use the numeric keys to enter the appropriate ITU-T sub-address.
Then press <Enter>.
Enter Password
_
The password setting is optional, but required if the other party has set a password on
their F-code box.
5
Use the numeric keys to enter the ITU-T password.
Then press <Enter>.
If you do not need to enter ITU-T password, press <Enter> without entering any num-
ber.
Enter Fax Number
_
6
Enter the fax number.
You may use a one-touch key, speed-dial number or the numeric keys to enter the fax
number.
7
Press <Start>. Your machine begins scanning the document. Then, your machine
dials and sends the document with the sub-address and password.
To cancel the sending in progress, press <Job Confirm./Fax Cancel> and <Cancel>,
<Cancel>.
To cancel the delayed sending, press <Job Confirm./Fax Cancel>, search the command
number you want to cancel using the cursor key, then press <Cancel>, <Cancel> (see
also "Reviewing or canceling command" on page 4-7).
NOTE: If you frequently dial the same destination with a sub-address (and password), use the
macro key at your convenience. For details of the macro key, see page 8-4.
copy 4


/ /Enter
>.
fax 4 scan
u f-
sInG code features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
6-11