Network Connection (Web Service Print); Tcp/Ip Setting For This Machine; Web Service Settings For This Machine; Printer Installation From The Network Window - Oce VarioLink 5022 User Manual

Manual installation using the Add Printer wizard
13
Follow the on-screen instructions.
– If the "User Account Control" window appears, click the [Continue] button.
– If the Verify the publisher dialog box of Windows Security appears, click "Install this driver software
anyway".
14
Click the [Finish] button.
15
When the installation is completed, make sure that the icon of the installed printer appears in the
Printers window.
16
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
Once the settings for the printer have been specified, you can use the printer in the same way as a default
local printer. Also, if you set up the printer for sharing in Windows, it can be used as a network printer by other
Windows computers over the network.
4.2.3

Network connection (Web Service print)

In Windows Vista, Web Service print-supporting printers on the network can be located and installed.
Note
When the different kind of printer driver install after installing the printer driver, delete the installed
printer driver in advance.
For details, refer to

TCP/IP setting for this machine

Specify the IP address in the TCP/IP Setting screen of this machine.
!
Detail
For details on specifying the IP address of this machine, refer to the User's Guide [Network
Administrator].

Web Service settings for this machine

To use the Web Service print, enable the print function in the Web Service Settings screen of this machine.
!
Detail
For details on the Web Service settings of this machine, refer to the User's Guide [Network
Administrator].

Printer installation from the Network window

Reminder
When installing on Windows Vista, administrator permissions are required.
1
Turn on the power of the machine while it is connected to the network.
– To allow printers to be detected during installation, the machine must be connected to the network.
2
To use the Web Service print, check that "Network discovery" is enabled in "Network and Sharing
Center" on the computer.
3
Insert the Driver CD into the CD-ROM drive of the computer.
4
Click the [Start] button, and then click "Network".
The Network window appears, showing the computers and devices on the network.
VarioLink 5022/VarioLink 4222/VarioLink 3622
"Manual uninstallation" on page 7-3.
4
4-17