Programming A Soft Key - Oce sx1481 User Manual

Function name
Page Counter
Energy Save
Online
Mode Switch
Note 1: The optional NIC (Network Interface Card) is required.
Note 2: The optional 2nd phone kit is required.
Note 3: For details of PC printing, refer to the PDF manual on the GDI Printer/Scanner Driver CD supplied
with the machine.
The following functions are the default settings:
Soft key 1
Soft key 2
Soft key 3
NOTE: When "Report", "Fax & Copy", "Memory Tx", "Cover Page" or "Select TTI" are
selected, the function is only valid for the following transmission. Once that trans-
mission is complete, the setting returns to its default setting. If you want to change
the default setting, see "User settings" on pages 10-1 to 10-8.

Programming a soft key

1
Press <Menu>, <2>, <1>, <0>, <3>, then <Enter>.
Select Soft Key No.
1:Sort Copy
The machine shows the function currently assigned to the soft key.
2
Press <q> or <p> to select the soft key (1 to 3) you want to change.
3
Press <Enter>.
1:Sort Copy
4
Press <q> or <p> to select the function you want to assign.
5
Press <Enter>.
6
If you want to program another soft key, repeat this procedure from step 2.
To exit the operation, press <Reset>.
7
Use the soft key labels supplied with your machine to label the soft key for easy refer-
ence.
NOTE: Default settings cannot be set into another soft key.
Descriptions
Displays total printed and scanned page.
Switches to the energy save mode immediately.
Cancels PC printing.
Switches the machine's mode.
Report
Monitor
Pause /Dial Opt.
 
/ /Enter
Reference
Light indication
page
— 8-8
on 1-16
on
Note 3
— 2-2
s
pecIaL features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
8-3