Erasing a call group
1
Press <Menu>, <1>, <3>, <2>, then <Enter>.
2
Press <q> or <p> to select the call group you want to erase.
You can also select the call group by directly entering the two-digit identifier code
(01-32).
3
Press <Enter> twice.
If you want to exit without erasing, press <Cancel>.
4
To erase another call group, repeat the procedure from step 2.
Otherwise, press <Reset> to exit and return to the standby mode.
How to dial using a call group
To perform call group fax dialing
1
Switch to the fax mode by pressing <
2
Place the document on the ADF.
3
Adjust the document resolution and contrast.
4
Press <Speed Dial /Group> twice.
Enter Group No.
G_
5
Use the numeric keys to enter the two-digit call group number.
6
Press <Start>.
3-10 a
utodIaLLer
Enter group number.
>.
4
4
copy
fax
scan
Press this key twice.
Press <Start>.