Plug in and power up
1
Plug the non-pronged end of the supplied AC power cord into the AC socket on the
machine and the pronged end into a properly grounded AC outlet.
2
Turn on the power switch. The markings are international standards:
I means on, O means off.
It will take a few seconds for the machine to warm up.
The machine will show:
Warming up
NOTE: While the power is on, the scanner lamp will always lights, but this does not mean
machine failure. See also "Scanner Sleep" on page 10-4.
Loading paper and adjusting the paper size setting
Please see "Paper handling" on pages 2-12 to 2-16.
1-10 L
& I
ayout
nstaLLatIon