Graco 313483A Operation - Repair - Parts page 75

ti13729a
English
5. Rotate pump until
transducer port is
aligned directly to back
of sprayer. Connect
transducer and hand
tighten securely.
NOTE: Clean out ALL
media and debris from
transducer and trans-
ducer port before con-
necting transducer.
中文
5. 转动泵，直到传感器端
口直接对准喷涂机的背
后。连接传感器并用手
牢固拧紧。
注释： 连接传感器之前
要清除传感器上和传感
器端口内的所有介质和
污物。
313483A
ti6312a
ti6204a
6. Tighten latch and
rotate latch lock into
locked position.
6. 拉紧插销，并将插销的
扣锁旋入锁定位置。
ti7330a
7. Top Coat Pump:
Attach drain hose to
sprayer.
7. 面漆泵：将回流管装到
喷涂机上。
Repair / 修理
ti5493a
8. Fill pump with Graco
TSL until fluid flows
onto top of seal.
8. 给泵注入 Graco 喉管
密封液 （TSL）直到液
体流到密封件的顶部时
为止。
75