Graco 313483A Operation - Repair - Parts page 29

ti11810a
English
17. Remove and thoroughly clean
applicator, spray tips and guard
with brush.
中文
17. 卸下并用刷子彻底清洗喷涂器、
喷嘴及护罩。
313483A
ti11811a
18. Clean hardened material from
applicator nozzles with air nozzle
cleaner.
18. 用空气喷嘴清洁器清除喷涂器喷
嘴上的已硬化的涂料。
Operation / 操作
NOTICE
Do not use air nozzle cleaner to clean
applicator check valve or airless spray
tip. Damage will occur.
Remove air check valve from applica-
tor to clean hardened material from
interior of applicator.
注意
不要使用空气喷嘴清洁器来清除喷涂器止
回阀或无气喷嘴。否则会发生损坏。
若需清除喷涂器内的已硬化的涂料，要从
喷涂器上卸下空气止回阀。
ti13642a
29