English
NOTICE
Do not use bearing hous-
ing screws (41) to align or
seat bearing housing with
drive housing. Align these
parts with locating pins to
avoid premature bearing
wear.
中文
注意
不要用轴承套螺钉 (41)
将轴承套与驱动室对准或对
位。要用定位销来对准这些
部件,以免轴承过早磨损。
313483A
5. Install screws (41) and
washers (42) in bear-
ing housing. Torque
evenly to 40 ft-lb (54
N•m).
5. 将螺钉 (41)和垫
圈 (42)装到轴承
套上。用 40 磅英尺
(54 N•m)的扭力
均匀拧紧。
6. Install Pump, page 70.
6. 安装泵,第 70 页。
Repair / 修理
45