Graco 313483A Operation - Repair - Parts page 27

ti4551c
English
9. Run pump until clean-
ing ball exits material
hose. Save cleaning
ball (Base Coat Only).
中文
9. 让泵运转，直到清
洗球从料管中掉出。
保管好清洗球
（仅限底色漆） 。
313483A
ti10796b
ti13633a
10. Turn on/off switch OFF
and turn prime valve to
DRAIN. Clean outside
of pump and suction
tube with brush and
water.
10. 关断通 / 断开关，然后
将填料阀旋转至泄压位
置。用刷子和水清洁泵
及吸料管的外表面。
ti13636a
11. Connect applicator to
material hose. Close
drain valve.
11. 将喷涂器连接到料
管上。关闭泄压阀。
Operation / 操作
ti10795b
12. Turn on/off ON.
Base Coat Pump:
Turn on/off switch ON
and prime switch ON,
or applicator switch on
material hose.
12. 接通通 / 断开关。
底色漆泵：接通通 /
断开关和填料开关，
或接通料管上的喷涂
器开关。
27