Phone Status - Yealink SIP-T41P User Manual

User Guide for the SIP-T41P IP Phone
After your phone is powered on, the system boots up and performs the following steps:
Automatic Phone Initialization
The phone finishes the initialization by loading the saved configuration. The LCD screen
displays "Initializing...please wait" during this process.
DHCP (Dynamic Host Configuration Protocol)
The phone attempts to contact a DHCP server in your network to obtain valid IPv4
network settings (e.g., IP address, subnet mask, default gateway address and DNS
address) by default.
Note
If your network does not use DHCP , proceed to
You can view phone status via phone user interface or web user interface.
Available information of phone status includes:
Network status (e.g., IPv4 status, IP address mode, MAC address, LAN type, LAN IP

and LAN mask).
Phone status (e.g., device model, hardware version, firmware version, product ID

and device certificate status).
Account status (e.g., register status of SIP accounts).

To view the phone status via phone user interface:
1. Press
2. Press
To view the phone status via web user interface:
1. Open the web browser on your computer.
2. Enter the IP address in the browser's address bar, and then press the Enter key.
3. Enter the user name (admin) and password (admin) in the login page.
4. Click Confirm to login.
The phone status is displayed on the first page of the web user interface.
14
, or press Menu->Status.
or to scroll through the list and view the specific information.
Basic Network Settings on page 15.