Yealink SIP-T41P User Manual page 110

User Guide for the SIP-T41P IP Phone
Intercom features you need to know:
Intercom Feature
Accept Intercom
Intercom Mute
Warning Tone
Intercom Barge
To configure intercom features via phone user interface:
1. Press Menu->Features->Intercom.
2. Make the desired changes.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
These specific parameters are configurable via web user interface at the path
Features->Intercom.
Accept Intercom
You can enable or disable the phone to automatically answer an incoming intercom call.
If Accept Intercom is enabled, the phone automatically answers an incoming intercom
call. If Accept Intercom is disabled, the phone rejects incoming intercom calls and sends
a busy message to the caller. Accept Intercom is enabled by default.
Note Your administrator can set a period of delay time before the phone automatically
answers intercom calls. Contact your system administrator for more information.
Intercom Mute
You can mute or un-mute the microphone on the phone for intercom calls automatically.
If Intercom Mute is enabled, the microphone is muted for intercom calls. If Intercom
Mute is disabled, the microphone works for intercom calls. Intercom Mute is disabled by
default.
Warning Tone
You can enable or disable the phone to play a warning tone when receiving an
intercom call. If Warning Tone is enabled, the phone plays a warning tone before
100
Description
Enable or disable the IP phone to automatically
answer an incoming intercom call.
Enable or disable the microphone on the IP phone for
intercom calls.
Enable or disable the IP phone to play a warning
tone when it receives an incoming intercom call.
Enable or disable the IP phone to automatically
answer an incoming intercom call while there is
already an active call on the phone.