Yealink SIP-T41P User Manual page 61

forward interface. You can activate or deactivate call forward for one or all
accounts.
Note If the Value field is left blank, the DSS key performs the same as the Fwd soft key when
receiving an incoming call.
When call forward is activated, the forward key LED will illuminate solid green.
Transfer
You can use this key feature to handle the call differently depending on the transfer
mode via DSS key when there is an active call on the phone.
Dependencies:
Usage:
When the transfer mode via DSS key is Blind Transfer, press the DSS key to

complete the blind transfer to the number specified in the Value field.
When the transfer mode via DSS key is Attended Transfer, press the DSS key to dial

out the number specified in the Value field, and then perform the attended or
semi-attended transfer.
When the transfer mode via DSS key is New Call, press the DSS key to place a new

call to the number specified in the Value field.
Note
Transfer mode via DSS key is configurable via web user interface at the path
Features->Transfer. For more information on how to configure the transfer mode via DSS
key, refer to Busy Lamp Field (BLF)
When leaving the Value field blank, the DSS key performs the same as the Tran soft key
during a call.
Hold
You can use this key feature to place an active call on hold or retrieve a held call.
Dependencies:
Usage:
1. Press the DSS key during an active call to place the call on hold.
2. Press the DSS key again to retrieve the held call.
Type (Key Event)
Key Type (Tran)
Label (key label displayed on the LCD screen)
Value (the number you want to transfer to)
on page 93.
Type (Key Event)
Key Type (Hold)
Label (key label displayed on the LCD screen)
Customizing Your Phone
51