Call Waiting - Yealink SIP-T41P User Manual

for more information).
3. Press or
4. Press the Tran soft key to complete the transfer when receiving ringback.
To perform an attended transfer:
1. Press the Tran soft key during a call.
2. Do one of the following:
Press the Directory soft key, and then select Local Directory. Select the desired
-
group and search for the contact (Directory should be configured in advance.
Refer to Directory
Press the Directory soft key, and then select History. Select the desired list and
-
press or
advance. Refer to
- Press the Directory soft key, and then select Remote Phone Book. Select the
desired group and search for the contact (Directory should be configured in
advance. Refer to
for more information).
3. Press or
4. After the party answers the call, press the Tran soft key to complete the transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
You can cancel the transfer before the call is connected by pressing the Cancel soft key.
You can enable or disable call waiting on the phone. If call waiting is enabled, you can
receive another call when there is an active call on the phone. Otherwise, another
incoming call is automatically rejected by the phone with a busy message when there is
an active call on the phone. You can also enable or disable the phone to play a warning
tone when receiving another call.
To configure call waiting via phone user interface:
1. Press Menu->Features->Call Waiting.
2. Press or , or the Switch soft key to select Enable from the Call Waiting field.
3. Press or , or the Switch soft key to select Enable from the Play Tone field.
4. (Optional.) Enter the call waiting on code or off code respectively in the CW On
to dial out.
on page 26 for more information).
to select the entry (Directory should be configured in
Directory on page
Directory on page
to dial out.
26 for more information).
26 and Remote Phone Book
Basic Call Features
on page 37
83