Yealink SIP-T41P User Manual page 26

User Guide for the SIP-T41P IP Phone
4. Enter the desired values in the IP Address, Prefix, Default Gateway, Primary DNS
and Secondary DNS fields respectively.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Note Using wrong network settings may result in inaccessibility of your phone and may also
have an impact on your network performance. For more information on these
parameters, contact your system administrator.
Generally, your phone will be deployed with multiple other phones. In this case, your
system administrator will configure the phone parameters beforehand, so that after you
start up your phone, the phone will be registered and ready for use. If your phone is not
registered, you may have to register it. For more information on how to register your
phone, refer to
If the phone has successfully started up, the idle LCD screen will be shown as below.
The idle screen shows the label of current account, time and date, and four soft keys.
16
Account Management on page 54.