Remote Switching Control - Lindy SC5 User Manual

Remote switching control

The port switching functions of the SC5 units can be
remotely controlled by an RS232 link to the
the rear panel.
The sending device must use the following RS232
communication settings:
Baud rate: 19200 bps
Data bits: 8
Parity: None
Stop bits: 1
No handshaking is implemented, however, valid command characters will be
echoed back to the sending device.
The value of the byte received via the serial link determines which computer port
should be linked through to the user port. The table given here summarises the
valid control codes:
     
10 11 12 13 14 15
REMOTE
port on
CONTROL
OPTIONS
Host computer port/channel
   0  
16 17 18 19 1A 1B
Cable from serial
control device
    0 (video off)
1C 1D 1E 1F 71
SC rear panel
O P
T I O
N S
5 V
2 . 0
1 6
A
1
1 2
C O
1
M P
U T