Aastra DT4X3 User Manual page 93

User Manual
Cordless Phones for BusinessPhone™
A.8 Transfer a call
A.8.1 Transfer a Call to the Handset
To transfer a call to the handset from the Bluetooth headset, press "More" on the
handset during the call, and select "Audio transfer".
If supported by the headset, it is also possible to transfer a call to the handset with by
pressing the headset button.
A.8.2 Transfer a Call to the Bluetooth Headset
To transfer the call to the Bluetooth headset, press "More" on the handset during the
call, and select "Audio transfer".
It is also possible to transfer a call to the Bluetooth headset by pressing the button
the Bluetooth headset.
A.9 Switch to a Headset with Cord
If a headset with a cord is connected during a call, the call is transferred to this headset
automatically.
A.10 Menu Tree
See 8.8 Settings
A.11 Operation Notice
A.11.1 Accessibility and Voice quality
Bluetooth uses the frequency of 2.45 GHz. WLAN, microwave oven, and other devices
that use the same frequency can disturb the use of a Bluetooth headset.
A.11.2 Operation Area
Maximum distance between the headset and the handset is 10 metres. The
communication distance between the handset and headset may vary considerably due
to the environment and disturbances from other 2.45 GHz equipment. Different
headsets can also give different communication distances.
A.11.3 Out of Range
If a connection cannot be made with the selected Bluetooth headset, the call is
transferred automatically to the handset.
If the Bluetooth headset and the handset get out of range from each other, the
connection is temporarily lost. Since the last connected headset is always considered
"selected", the connection is automatically established again when a call is made or
received. In case of more than one paired headset in list, the preferred headset used
for calls, is always first in list.
19. For intruction, see the headset manual.
AMT/PUD/TR/0119/1/2/EN 2012-08-13
on page 56.
19
on
87