Table of Contents
Advertisement
User Manual
Cordless Phones for BusinessPhone™
6.2.2
Post-Dial with Headset Button
If a headset is used, it is possible to press its button
the number to be dialled.
6.2.3
Dial Using a Pre-programmed Navigation Key, Hot Key, Soft key, or Headset
Button
A Navigation key
number. Press the pre-programmed key/button to dial the number. The call will
automatically be connected.
6.2.4
Dial a Number from the Call list
Tip: It is also possible to dial a number from the Call list by pressing
number in the list, and then press "Call" or
1
Open the menu by pressing the "Menu" soft key.
2
Select
3
Select "Call list".
4
Select a number.
5
Press
is dialled. Press "More" and select "Edit number". The 25 last received, dialled or
missed calls are stored in a call list. See
6.2.5
Dial Last Called Number with Headset Button
If a headset is used, it is possible to press its button
6.2.6
Dial the Sender of a Message
It is possible to call the sender of a message stored in the message list.
1
Open the menu by pressing the "Menu" soft key.
2
Select
3
Select "Inbox".
4
Select message in the message list.
5
Press "View".
6
Press "More".
7
Select "Call sender".
6.2.7
Dial a Number from the Local Phonebook
1
Open the menu by pressing the "Menu" soft key.
2
Select
3
Select "Call contact".
4
Select contact from list, or search name/number by entering characters and
select search.
5
Press "Call" or
2.See
8.7 Short Cuts
on page 55 fore more information how to configure the key.
3.The headset button must be configured in the WinPDM.
AMT/PUD/TR/0119/1/2/EN 2012-08-13
2
1
1
, Hot key
, Soft key
, or a headset button
.
or the soft key "Call" to dial. The number can be edited before the call
.
.
to make the call.
2
to get a ring tone and then enter
3
can be programmed with a
.
5.1 Calls
on page 24.
2
to dial the last called number.
, selecting a
32
Advertisement
Table of Contents
