Comply with local and national safety requirements when working in hazardous locations.
Use proper protective equipment, as required by local or national authorities when working
in hazardous areas.
Avoid working alone.
Use only the replacement fuse specified or the protection may be impaired.
Check the test leads for continuity before use. Do not use if the readings are high or noisy.
Do not use the Auto Volts function to measure voltages in circuits that could be damaged by
this function's low input impedance ( 3 k )(117 only).
AC (Alternating Current)
DC (Direct Current)
Battery (Low battery when shown on the
Do not dispose of this product as unsorted
municipal waste. Contact Fluke or a
qualified recycler for disposal.
Important Information; Refer to manual
AC and DC