Table of Contents
Advertisement
Introduction
The Fluke Model 110, Model 113, Model 114, Model 115, and Model 117 (the Meter or Product) are battery-
powered, true-rms multimeters with a 6000-count display and a bar graph. This manual applies to all models. All
figures show the Model 117 unless indicated.
How to Contact Fluke
To contact Fluke, call one of the following telephone numbers:
•
Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
•
Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
•
Canada: 1-800-36-FLUKE (1-800-363-5853)
•
Europe: +31 402-675-200
•
Japan: +81-3-6714-3114
•
Singapore: +65-6799-5566
•
China: +86-400-921-0835
•
Brazil: +55-11-3530-8901
•
Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com.
To register your product, visit http://register.fluke.com.
To view, print, or download the latest manual supplement, visit http://us.fluke.com/usen/support/manuals.
To request a printed manual, visit www.fluke.com/productinfo.
Safety Information
For Product safety information, see the printed 110/113/114/115/117 Safety Information included with the
Product or located on the Fluke website.
Unsafe Voltage
To alert you to the presence of a potentially hazardous voltage, the Z symbol is displayed when the Meter
measures a voltage ≥30 V or a voltage overload (OL) condition. When making frequency measurements >1 kHz,
the Z symbol is unspecified.
Test Lead Alert
Personal injury or damage to the Meter can occur if you attempt to make a measurement with a
lead in an incorrect terminal.
To remind you to check that the test leads are in the correct terminals, LEAd is briefly displayed and an audible
beep sounds when you move the rotary switch to or from any A (Amps) position.
XW Warning
1
Advertisement
Table of Contents
