Factory Default Settings - Billion BiPAC 6404VGP R3 User Manual

Factory Default Settings

Before configuring your router, you need to know the following default settings.
Web Interface (Username and Password)
Username: admin
Password: admin
The default username and password are "admin" and "admin" respectively.
Device LAN IP settings
IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
ISP setting in WAN site
PPPoE
DHCP server
DHCP server is enabled.
Start IP Address: 192.168.1.100
IP pool counts: 100
LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown in
the table.
LAN Port
IP address
Subnet Mask
DHCP server function
IP addresses for distribution
to PCs
192.168.1.254
255.255.255.0
Enabled in ports 1, 2, 3 and
4
100 IP addresses continuing
from 192.168.1.100 through
192.168.1.199
18
WAN Port
The PPPoE function is
enabled to automatically get
the WAN port configuration
from the ISP.