Table of Contents
Advertisement
3. Set up VoIP.
SIP: To use VoIP SIP as VoIP call signaling protocol. Default is set to Disable.
Region: This selection is a drop-down box, which allows user to select the country for which the VoIP
device must work. When a country is selected, the country parameters are automatically loaded.
SIP Service Provider: This section allows you to select the service provider. When the selection is
done, respective parameters below are automatically displayed.
Phone Number: This parameter holds the registration ID of the user within the VoIP SIP registrar.
Username: If the username is same as the Phone Number, leave it blank. Otherwise, fill in the space
with your username given by your VoIP provider.
Password: This parameter holds the password used for authentication within VoIP SIP registrar.
Display Name: This parameter will be appeared on the Caller ID.
4. Wait for the configuration.
33
Advertisement
Table of Contents
