Table of Contents
Advertisement
Configuring Packet Filter:
1. Click Packet Filters. You will then be presented with the predefined port filter rules screen (in
this case for the low security level), shown below:
Note: You may click Edit the predefined rule instead of Delete it. This is an example to show
to how you add a filter on your own.
2.
If you want to delete a filter rule, select the delete radio button of the HTTP rule you want to
delete. Then click the Edit/Delete button to delete the rule.
3.
To add a new rule, Input the Rule Name, Time Schedule, Source/Destination IP, Type, Source /
Destination Port, Inbound and Outbound. Then click the Add button.
73
Advertisement
Table of Contents
