Billion BiPAC 6404VGP R3 User Manual page 114

Specify a name and password for authentication and define the access right from an identified IP
address. Once the authentication has succeeded, users with this IP address will be able to view
and modify the data.
SNMP Version: SNMPv2c and SNMPv3
SNMPv2c is the combination of the enhanced protocol features of SNMPv2 without the SNMPv2
security. The "c" comes from the fact that SNMPv2c uses the SNMPv1 community string paradigm
for "security", but is widely accepted as the SNMPv2 standard.
SNMPv3 is a strong authentication mechanism, authorization with fine granularity for remote
monitoring.
Traps supported: Cold Start, Authentication Failure.
The following MIBs are supported:
From RFC 1213 (MIB-II)
 System group
 Interface group
 Address Translation group
 IP group
ICMP Group
 TCP group
 UDP group
 EGP (not applicable) Transmission
 SNMP group
From RFC 1650 (EtherLike-MIB)
 dot3stats
From RFC 1493 (Bridge MIB)
 dot1 dBase group
 dot1 dTp group
 dot1 dStp group (if configured as
spanning tree)
From RFC 1472 (PPP/Security MIB)
 PPP security group
From RFC 1473 (PPP/IP MIB)
 PPP IP group
From RFC 1474 (PPP/Bridge MIB)
 PPP Bridge group
From RFC 1573 (IfMIB)
 ifMIBObjects group
From RFC 1695 (atmMIB)
 atmMIBObjects
From RFC 1907 (SNMPv2)
 only snmpSetSerialNo OID
From RFC 1471 (PPP/LCP MIB)
 pppLink group
 pppLgr group (not applicable)
112