Table of Contents
Advertisement
Device Description
The Front LEDs
LED
1
Power
2
Ethernet Port
3
Wireless
Phone 1x - 2x
4
(RJ-11 connector)
Line(Router with
LINE
5
port only)
VoIP 1x - 2x
6
(RJ-11 connector)
7
WAN
8
Internet
Both red and green LEDs lit together when power is ON.
Lit red means system failure.
Restart the device or contact support.
Lit green when the device is ready.
Lit when one of LAN ports is connected to an Ethernet device.
Lit green when the speed of transmission hits 100Mbps;
Lit orange when the speed of transmission hits 10Mbps.
Blink when data is being Transmitted / Received.
Lit green when the wireless connection is established.
Flash when sending/receiving data.
Flash once per second while Wi-Fi protected setup is in
progress.
Lit green when phone is off hook.
Lit green when the inbound and outbound calls are
transmitted through PSTN.
Lit green when phone 1 has registered successfully.
Lit orange when phone 2 has registered successfully.
If both phone 1 & 2 have succeeded in registration, both green
and orange LEDs will lit together.
Lit green/orange when connected to an modem or Cable
modem's Ethernet port well.
Lit red when WAN port fails to get IP address.
Lit green when WAN port gets IP address successfully.
Lit off when the device is in bridge mode or when WAN
connection is absent.
5
Meaning
Advertisement
Table of Contents
