Table of Contents
Advertisement
The Rear Ports
Port
1
Antenna
2
Line
3
Phone 1X-2X
4
WAN
5
Ethernet
6
RESET
7
Power
8
Power Switch Power ON/OFF switch.
Meaning
Connect the detachable antenna to this port.
Connect this port to the telephone jack on the wall with RJ-11cable.
Connect this port to an analog phone set with RJ-11 cable.
WAN 10/100M Ethernet port (with auto crossover support); connect
xDSL / Cable modem here.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the LAN
ports when connecting to a PC or an office/home network of 10Mbps
or 100Mbps.
Caution: Port 4 can be either a LAN or Console port at a time
but not both.
To be sure the device is being turned on press RESET button for:
1-3 seconds: quick reset the device.
6 seconds and above, power off, power on the device: restore to
factory default settings. (Cannot login to the router or forgot your
Username/Password. Press the button for more than 6 seconds).
Caution: After pressing the RESET button for more than
6 seconds, to be sure you power cycle the device again.
Connect it with the supplied power adapter.
6
Advertisement
Table of Contents
