Billion BiPAC 6404VGP R3 User Manual page 53

Voip/802.11g broadband firewall router

Hide thumbs Also See for BiPAC 6404VGP R3:

Table of Contents

Adding a new WPS device (wireless client) to a network - Use PBC Method

Step 1: Push AP's WPS button more than one second and you will see AP's WLAN led will

flashing per second.

Step 2: Open wireless client's WPS utility, select "Join a wireless network" and apply "next"

button.

Note: After you push AP's WPS button, below steps should be completed between 2 minutes.

Step 3: Select "Push the button on my access point" and apply "next" button.

Table of Contents