Table of Contents
Advertisement
: 20 predefined rules are available. Application, Protocol and External/Redirect Ports
will be filled after the selection.
Protocol: It is the supported protocol for the virtual server. In addition to specifying the port number
to be used, you will also need to specify the protocol used. The protocol used is determined by the
particular application. Most applications will use TCP or UDP.
Time Schedule: User defined time period to enable your virtual server. You may specify a time
schedule or select "Always on" for this Virtual Server Entry. For setup and detail, refer to Time
Schedule section.
Global IP: Define a public / WAN IP address for this Application. This Global IP address must be
defined in the Global IP Address blank.
External Port: The Port number on the Remote / WAN side used when accessing the virtual
server.
Redirect Port: The Port number used by the Local server in the LAN network.
Internal IP Address: The private IP in the LAN network which provides the virtual server
application.
List all the existing PCs connecting to the network. You may assign a
PC with an IP address from this list.
Select the Add button to apply your changes.
102
Advertisement
Table of Contents
