The Rear Ports - Billion BiPAC 7402NX User Manual

802.11n 3g/adsl2+ (vpn) firewall router
Hide thumbs Also See for BiPAC 7402NX:
Table of Contents

Advertisement

The Rear Ports

Port
Antenna
1
DSL
2
Ethernet
3
1X - 4X
(RJ-45 connector)
USB
4
5
Console
6
RESET
7
WPS
Power
8
Power Switch
9
Chapter 2: Installing the router
Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router
Meaning
Connect the detachable antenna to this port.
Connect the supplied RJ-11 ("telephone") cable on this port
when connecting to the ADSL/telephone network.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
LAN ports when connecting to a PC or an office/home
network of 10Mbps, 100Mbps or 1000Mbps.
Connect the USB cable on this port.
Console port.
3G/ HSDPA USB modem backup for Internet access.
To be sure the device is being turned on  press RESET
button for:
1-3 seconds: quick reset the device.
6 seconds above, and power off, power on the device:
restore to factory default settings. (Cannot login to the router
or forgot your Username/Password. Press the button for more
than 6 seconds).
Caution: After pressing the RESET button for more than 6
seconds, to be sure you power cycle the device again.
Push WPS button for less than 5 sec to trigger Wi-Fi
Protected Setup function; push WPS button for more than 5
sec to enable/disable WLAN Service.
Power ON/OFF switch
Connect the supplied power adapter to this jack.
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bipac 7402nxl

Table of Contents