Billion BiPAC 7402NX User Manual page 78

Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router
Fixed IP Address
Select this option to set static IP information. You will need to enter in the Connection type, IP address,
netmask, and gateway address, provided to you by your ISP. Each IP address entered in the fields must
be in the appropriate IP form, which is four IP octets separated by a dot (x.x.x.x). The Router will not
accept the IP address if it is not in this format.
Profile Port: Select the profile port as EWAN.
WAN Port: the router offers its Ethernet port 1 as a WAN port to be used to connect to Cable Modems
and fiber optic lines.
Protocol: Select Fixed IP Address.
IP: Your WAN IP address. Leave this at 0.0.0.0 to automatically obtain an IP address from your ISP.
Netmask: The default is 0.0.0.0. User can change it to other such as 255.255.255.0.Type the netmask
assigned to you by your ISP (if given).
Gateway: You must specify a gateway IP address (supplied by your ISP).
NAT: The NAT (Network Address Translation) feature allows multiple users to access the Internet through a
single IP account, sharing the single IP address. If PCs in LAN should share the WAN IP for WAN access,
please enable NAT. If users on your LAN have public IP addresses and can access the Internet directly, the
NAT function can be disabled.
MAC Spoofing: Some service providers require the configuring of this option. You must fill in the MAC
address that specify by service provider when it is required. Default is disabled.
Obtain DNS: Select Automatic to use DNS.
Primary DNS/ Secondary DNS: Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the subnet mask.
IPv6: check to enable IPv6 service. Enter IPv6 Gateway address and set IPv6 DNS as same in IPv4
mode.
IP/Prefix Length: Please specify the IP and the prefix length for the IPv6 address from your ISP.
Gateway: Type the gateway to which the WAN packets are forwarded.
Obtain IPv6 DNS: check Automatic to obtain DNS automatically. If not, please type the concrete ones
in the Primary and Secondary fields.
74
Chapter 4: Configuration