Billion BiPAC 7402NX User Manual page 83

Connect to Demand: If you want to make UMTS/GPRS call only when there is a packet requesting
access to the Internet (i.e. when a program on your computer attempts to access the Internet). In this
mode, you must set Idle Timeout value at same time. Enabling Connect on Demand will give you an
option of Idle Timeout.
Idle Timeout: Auto-disconnect the connection when there is no activity on this call for a
predetermined period of time. The default value is 10 min(s).
Obtain DNS Automatically: Select this checkbox to use DNS.
Primary DNS/ Secondary DNS: Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the subnet mask.
Note: If you don't know how to set these values and please keep them untouched.
Chapter 4: Configuration
Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router
79