Wireless - Billion BiPAC 7402NX User Manual

Wireless

Parameters
WLAN Service: Choose Disabled/Enable/TimeSlot from the drop-down list.
Mode: The default setting is 802.11b+g+n (Mixed mode). If you do not know or have both 11g and 11n
devices in your network, then keep the default in mixed mode. From the drop-down manual, you can
select 802.11g if you have only 11g card. If you have only 11b card, then select 802.11b. If you have only
11n card, then select 802.11n.
ESSID: The ESSID is the unique name of a wireless access point (AP) to be distinguished from another.
For security purpose, change the default wlan-ap to a unique ID name to the AP which is already built-in
to the router's wireless interface. It is case sensitive and must not excess 32 characters. Make sure your
wireless clients have exactly the ESSID as the device, in order to get connected to your network.
Note: It is case sensitive and must not excess 32 characters.
ESSID Broadcast: It is function in which transmits its ESSID to the air so that when wireless client
searches for a network, router can then be discovered and recognized. Default setting is Enabled.
 Disable: If you do not want broadcast your ESSID. Any client uses "any" wireless setting cannot
discover the Access Point (AP) of your router.
 Enable: Any client that using the "any" setting can discover the Access Point (AP).
Regulation Domain: There are seven Regulation Domains for you to choose from, including North
Chapter 4: Configuration
Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router
42