Advanced; Static Route; Static Arp - Billion BiPAC 7402NX User Manual

Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router

Advanced

Configuration options within the Advanced section are for users who wish to take advantage of the more
advanced features of the router. Users who do not understand the features should not attempt to
reconfigure their router, unless advised to do so by support staff.
Here are the items within the Advanced section: Static Route, Static ARP, Dynamic DNS, Device
Management, IGMP and VLAN Bridge.

Static Route

Go to Configuration/Advanced/Static Route.
Destination: This is the destination subnet IP address.
Netmask: Subnet mask of the destination IP addresses based on above destination subnet IP.
Gateway: This is the gateway IP address to which packets are to be forwarded.
Interface: Select the interface through which packets are to be forwarded.
Cost: This is the same meaning as Hop. This should usually be left at 1.

Static ARP

Go to Configuration/Advanced/Static Route.
IP Address: Fill in the IP address of the host computer that is sending the data packet.
MAC Address: Fill in the MAC address of the computer that the incoming data packets are to be
forwarded.
152
Chapter 4: Configuration