Billion BiPAC 7402NX User Manual page 118

b) Identifier: Input remote ID's information, like domain name www.ipsectest.com.
Hash Function: It is a Message Digest algorithm which coverts any length of a message into a unique
set of bits. It is widely used MD5 (Message Digest) and SHA-1 (Secure Hash Algorithm) algorithms.
SHA1 is more resistant to brute-force attacks than MD5, however it is slower.
 MD5: A one-way hashing algorithm that produces a 128−bit hash.
 SHA1: A one-way hashing algorithm that produces a 160−bit hash
Encryption: Select the encryption method from the pull-down menu. There are several options, DES,
3DES and AES (128, 192 and 256). 3DES and AES are more powerful but increase latency.
c) DES: Stands for Data Encryption Standard, it uses 56 bits as an encryption method.
d) 3DES: Stands for Triple Data Encryption Standard, it uses 168 (56*3) bits as an encryption
method.
 AES: Stands for Advanced Encryption Standards, you can use 128, 192 or 256 bits as
encryption method.
DH (Diffie-Hellman) Group: It is a public-key cryptography protocol that allows two parties to establish a
shared secret over an unsecured communication channel (i.e. over the Internet). There are three modes,
MODP 768-bit, MODP 1024-bit and MODP 1536-bit. MODP stands for Modular Exponentiation Groups.
IPSec Proposal: Select the IPSec security method. There are two methods of checking the
authentication information, AH (authentication header) and ESP (Encapsulating Security Payload). Use
ESP for greater security so that data will be encrypted and authenticated. Using AH data will be
authenticated but not encrypted.
Authentication: Authentication establishes the integrity of the datagram and ensures it is not tampered
with in transmit. There are three options, Message Digest 5 (MD5), Secure Hash Algorithm (SHA1) or
NONE. SHA1 is more resistant to brute-force attacks than MD5, however it is slower.
e) MD5: A one-way hashing algorithm that produces a 128−bit hash.
f) SHA1: A one-way hashing algorithm that produces a 160−bit hash.
Encryption: Select the encryption method from the pull-down menu. There are several options, DES,
3DES, AES (128, 192 and 256) and NULL. NULL means it is a tunnel only with no encryption. 3DES and
AES are more powerful but increase latency.
g) DES: Stands for Data Encryption Standard, it uses 56 bits as an encryption method.
h) 3DES: Stands for Triple Data Encryption Standard, it uses 168 (56*3) bits as an encryption
method.
i) AES: Stands for Advanced Encryption Standards, you can use 128, 192 or 256 bits as
encryption method.
Perfect Forward Secrecy: Choose whether to enable PFS using Diffie-Hellman public-key cryptography
to change encryption keys during the second phase of VPN negotiation. This function will provide better
security, but extends the VPN negotiation time. Diffie-Hellman is a public-key cryptography protocol that
allows two parties to establish a shared secret over an unsecured communication channel (i.e. over the
Internet). There are three modes, MODP 768-bit, MODP 1024-bit and MODP 1536-bit. MODP stands for
Modular Exponentiation Groups.
Pre-shared Key: This is for the Internet Key Exchange (IKE) protocol, a string from 4 to 128 characters.
Both sides should use the same key. IKE is used to establish a shared security policy and authenticated
keys for services (such as IPSec) that require a key. Before any IPSec traffic can be passed, each router
must be able to verify the identity of its peer. This can be done by manually entering the pre-shared key
into both sides (router or hosts).
SA Lifetime: Specify the number of minutes that a Security Association (SA) will stay active before new
encryption and authentication key will be exchanged. There are two kinds of SAs, IKE and IPSec. IKE
negotiates and establishes SA on behalf of IPSec, an IKE SA is used by IKE.
 Phase 1 (IKE): To issue an initial connection request for a new VPN tunnel. The range can be
Chapter 4: Configuration
Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router
114