Adding Printers In Windows 98 And Me Over Netbios/Netbeui Using Axis Print Monitor - Axis 5400+ User Manual

Configure the Port:

Adding Printers in Windows 98 and Me over NetBIOS/NetBEUI using AXIS Print Monitor

Note:
AXIS 5400+ / AXIS 5600+ User's Manual
1. Select Settings | Printers Settings | Printers Settings | Printers Settings | Printers from the Start
you wish to configure. Select File | Properties | Details
Settings Settings Settings Settings.
2. Choose whether error condition pop-up messages are to be displayed by
checking the box in the Configure AXIS Ports
at which the error messages should be displayed after retry. Click OK
Note:
Even if the desired printer is available in the Manufacturers and Printers lists, you are
advised to use the print driver provided with the printer. This assures you of the latest
driver software.
Follow the procedures below to install Axis NetBIOS/NetBEUI printer
ports on a Windows 98 workstation, using AXIS Print Monitor:
1. To start the Add Printer Wizard, select Settings | Printers
menu and double-click the Add Printer
2. After clicking Next Next in the first dialog, the Wizard asks you to select Local
Next Next
printer or Network printer. Select Local printer
3. Choose the appropriate printer driver for your printer. If the desired printer
driver appears in the displayed Manufacturers
your selection, click Next Next and proceed directly to step 6. It is only necessary
Next Next
to perform steps 4 - 5 if your printer does not appear in the model list.
Even if the desired printer is available in the Manufacturers and Printers
lists, you are advised to use the printer driver provided with the printer. This
assures you of the latest driver software.
4. Click the Have Disk... Have Disk... Have Disk... Have Disk... button. Insert the printer driver diskette/CD that was
provided with your printer, select the appropriate diskette/CD drive and click
OK OK. OK OK
5. Select the printer driver you want to install and click Next
6. Select the AXIS Printer Port from the Available Ports list. The port names
appears as <name>.<port>. Here, <name> is AX followed by the last six
digits of the print server's serial number (e.g. AX100086) and <port> is taken
from the table below. Click the Configure Port button.
Ports available
AXIS 5400+
AXIS 5600+
Example: AX100086.LP1
Start menu and highlight the printer Start Start
File | Properties | Details File | Properties | Details and click Port File | Properties | Details
Configure AXIS Ports Configure AXIS Ports dialog. Define the frequency Configure AXIS Ports
Settings | Printers from the Start
Settings | Printers Settings | Printers
Add Printer icon.
Add Printer Add Printer
Local printer. Click Next
Local printer Local printer
Manufacturers and Printers
Manufacturers Manufacturers
Parallel port1 Parallel port 2
LP1 —
LP1 LP2
Adding Printers in Windows
Port Port Port
OK OK OK.
Start
Start Start
Next.
Next Next
Printers lists, highlight
Printers Printers
Next.
Next Next
Serial port
—
CM1
33