Electrolux ESI 6251 User Information page 24

Malfunction
The cycle indicator for the select-
ed dishwashing cycle is flashing:
fault code Å 10 is displayed in the
multi-display:
(Problems with water inlet)
The cycle indicator for the select-
ed dishwashing cycle is flashing,
fault code Å 20 is displayed in the
multi-display.
(Problems with water drainage)
Fault code Å 30 is displayed in the
multi-display.
The cycle is not starting.
Rust spots are visible in the dish-
washing compartment.
A whistling noise can be heard
when washing dishes.
24
Possible cause
Water tap is blocked with limescale
or faulty.
The tap is turned off.
The filter (where present) in the
threaded hose fitting on the tap is
blocked.
Filters in the base of the dishwash-
er compartment are blocked.
Water inlet hose
has not been correctly positioned.
The sink spigot connection is
blocked.
Water drain hose
has not been correctly positioned.
The anti-flood system has been
triggered.
The mains plug is not
plugged in.
A fuse in the house's wiring system
is defective.
For dishwasher models with a delay
start timer:
A start time has been selected.
The dishwashing compartment is
made from rust-free stainless steel.
Rust spots in the dishwashing com-
partment are due to rust particles
from external sources (rust particles
from water pipes, pans, cutlery,
etc.). Remove such spots with a
commercially-available stainless
steel cleaning product.
The whistling is not a cause for
concern.
Remedy
Check the water tap and have it re-
paired if necessary.
Turn the tap on.
Clean the filter in the threaded hose
fitting.
Cancel the dishwashing cycle (see
chapter: Starting a dishwashing cy-
cle),
clean filters (see chapter: Cleaning
the filters),
then start the dishwashing cycle
again.
Check the position of the hose.
Clean the sink spigot outlet.
Check the position of the hose.
First shut off the water tap, then
switch off the appliance and contact
the Customer Care Department.
Plug in mains plug.
Replace fuse.
If the dishes are to be washed im-
mediately, cancel the delay start.
Only wash cutlery, dishes and pans
that are suitable for dishwasher use.
Decalcify appliance with commer-
cially available agents for cleaning
dishwashers.
If the noises can still be heard after
decalcifying the machine, use a dif-
ferent brand of detergent for wash-
ing cutlery and dishes.