Download  Print this page

Electrolux ESI 6251 User Information page 8

Electrolux dishwasher
Hide thumbs

Advertisement

Setting electronically:
1. Press the ON/OFF button.
3
If indicators for the programme buttons are lit,
a dishwashing cycle is activated. The cycle
must be deactivated:
Press function buttons 2 and 3 simultaneously
for approx. 2 seconds.
All additional wash programme button indica-
tors will go out.
2. Press function buttons 2 and 3 simultaneously and
keep them pressed.
The LED indicators for function buttons 1 to 3 will
flash.
3. Press function button 1.
The LED indicator for function button 1 will flash.
The multi-display will indicate the hardness setting.
4. Pressing function button 1 increases the hard-
ness setting by 1.
(Exception: hardness setting 1 follows hardness
setting 10).
5. When the hardness setting is correct, press the
ON/OFF button.
The hardness setting is now saved.
If the water softener is set electronically to "1", this
switches off the control indicator for dishwasher salt.
Water hardness
1)
in °d
in mmol/l
51 - 70
9,0 - 12,5
43 - 50
7,6 - 8,9
37 - 42
6,5 - 7,5
29 - 36
5,1 - 6,4
23 - 28
4,0 - 5,0
19 - 22
3,3 - 3,9
15 - 18
2,6 - 3,2
11 - 14
1,9 - 2,5
4 - 10
0,7 - 1,8
below 4
below 0.7
1) (°d) German degree, measure of the hardness of water
2) [mmol/l] millimol per litre, international unit for water hardness
3) On this setting the length of the dishwashing cycle may be slightly longer.
*) factory setting
8
2)
Range
IV
III
II
I/II
I
Adjusting the hardness setting
Manual
Electronic
1
0*
no salt necessary
Indication on the
multi-display
3)
10L .
10
9
9L
8
8L
7
7L
6
6L
5
5L
4*
4L
3
3L
2
2L
1
1L

Advertisement

loading

  Related Manuals for Electrolux ESI 6251