Checking The Configuration On Multiple Aps - Cabletron Systems RoamAbout User Manual

Hide thumbs Also See for RoamAbout:
Table of Contents

Advertisement

Checking the Configuration on Multiple APs

Checking the Configuration on Multiple APs
You can use the AP Manager to check the integrity of your APs' configuration. This
will insure that all your APs (within a domain) are configured correctly. You can select
to check the Wireless, Mode or Firmware integrity. Before running an integrity test,
click the Select All button under the list of APs to ensure that all the APs are checked.
Wireless IDs - Checks that all APs are configured with the same Wireless Network
Name, different station name, same AP density setting, and the same RTS Threshold.
Modes - Checks that all APs are configured with the same operating modes, such as
rate limiting, upline dump, and bridge mode.
Firmware Revisions - Verifies that all APs have the same version of the firmware.
Configuring the RoamAbout Access Point 4-13

Advertisement

Table of Contents
loading

Table of Contents